Applicable situation: The circuit board type EEG/EMG electrode is a hole reserved on the circuit board of a fixed size, and the EEG signal is obtained by implanting the cranial screw embedded in the hole into the skull, and the screw link the contacts on the hole, thereby, the electrical signal is transmitted to the connector. The recording site of electrode is fixed, and the individual variability is small. The muscle wire is a stranded multi-strand stainless steel wire with silica gel coating. Insert the electrode wire into the neck muscle to collect the EMG signal. Wire-type EEG/EMG electrode directly lead out 4 silver wires (EEG) and 2 stainless steel wires (EMG) from the connector. The silver wires can be connected to cranial nails in different brain regions according to actual needs, so as to collect EEG signals. The above two electrode are suitable for animal sleep monitoring, EEG and EMG analysis of disease animal models in scientific research experiments.

General parameters: 1.27, 2*3 round hole female connector.

KD-EEG/EMG-PCB: EEG: Mouse-specific, with 4 PCB-mounted conductive holes, secured by 2 M1*2 skull screws and 2 M1*3 skull screws for conductivity, EMG: 6 strands of stainless steel wire, each strand with a diameter of 20um, silicone-coated, see the left lower image。

KD-EEG/EMG-Ag: EEG lead: 0.1mm silver wire, 40mm in length, EMG: 6 strands of stainless steel wire, each strand with a diameter of 20um, silicone-coated, with a 2x3 round hole 1.27 pitch female header, see the right lower image.

KD-EEG/EMG-Rat: Rat-specific, EEG lead: 0.1mm silver wire, 40mm in length, EMG: 6 strands of stainless steel wire, each strand with a diameter of 20um, silicone-coated (Priced at $48 per piece, compatible with the Pinnacle special connector, please contact our pre-sales customer service for orders).

The number of channels and the definition of PIN pins can be customized according to actual needs

图片36-1-2.png

科斗（苏州）脑机科技有限公司